cp-e ΔCore™ Front mount Intercooler FMIC for 2021+ 2.3/2.7L Bronco EcoBoost:
- 18.875” x 4” x 7.75” Core Size
- Works with OEM or after market charge pipes
- Low Turbulence, fully cast End Tank Design
- Maximized Core Design
- CNC Machined, Billet 6061 Brackets
- Substantially Lower & More Consistent Charge Temps
- Bolt-in Design, No Vehicle Modification Needed
- Works with Adaptive Cruise Control
- Titan finish (silver)
- Lifetime Warranty
Requires no cutting, no drilling, and no permanent modification to the vehicle. With the CNC machined, billet 6061 brackets, the intercooler will mount in the stock location while matching up to the stock intercooler piping.Turbulence reduction fins work to distribute air evenly inside the core. The cp-e™ intercooler includes cast endtanks that are welded and pressure tested with the core, designed to virtually eliminate turbulance and therefore lag. The endtanks have been designed to direct the air properly into the core for the most even cooling, giving the vehicle the most consistent conditions going into the engine. With the cast in place brackets, the intercooler will mount in the stock location while matching up to the stock intercooler piping.
All cp-e™ Titan™ finished products feature a consistent matte finish over the entire product not only for aesthetics, but also to strengthen the metal and welds if present.
Note: cp-e™ cannot guarantee fitment with the use of any chargepipes other than stock or the cp-e chargepipe. Please consult with manufacturer regarding additional warranty and fitment concerns.
2021+ 2.3 / 2.7L Bronco cp-e ΔCore™ Front mount Intercooler FMIC
Application List:
2021+ Bronco 2.3L
2021+ Bronco 2.7L
WARNING: This is a Competition Use ONLY Product manufactured and sold for installation on vehicles to be used solely for competition motorsports, which, once such product is installed, may never be used, or registered or licensed for use upon a public road or highway. Any other use, including recreational off-road use, may be in violation of local, state, and Federal laws. ZFG Racing LLC does not implicitly or explicitly confirm the legality of using any products it sells on public roads; that is entirely the responsibility of the consumer. If a Competition Use Only Products is installed on a vehicle and that vehicle is used on a public road or highway, it may be considered in violation of the Clean Air Act and personally subject to substantial civil penalties.